Diy t-shirt suspender skirt (no sew) - FocusPositives FocusPositives

Diy t-shirt suspender skirt (no sew)

August 1st, 2020 § 0 comments

What to do with an huge old t shirt?

If you don’t know what to do with an old t shirt here’s a cute way to cut shirts. I had lots of fun figuring out how I could make use of this huge ugly t shirt I got from working at JC Penny’s during the holidays. Upcycle old t shirts are the best way to repurpose old t shirts. I created this simple t shirt tutorial cutting and braiding the huge t shirt into a cute suspender skirt that is great for the summer season. There’s no sewing involved. Simply cut, braid and tie some knots.Diy t-shirt suspender skirt (no sew)

  1. Pick a t-shirt that is large enough to cover the length you want your suspender skirt to be. Carefully plan and draw where you will make your cuts to the t shirt. Check your measurement twice and then again, you only have one chance to maximize the fabric on the t skirt so take your time. If you have tons of t shirts sitting around then you can afford a mistake or two to get it right. I had only one huge t shirt so I made everything is exactly the way I want before I made my cuts.

Diy t-shirt suspender skirt (no sew) part1

2. Cut the two side stips in the back at the waist line so the front of the two strips are still attached to the front waistline of the skirt. Cut the two side strips into 3 thin strips. These will be the front suspenders. Cut the middle wide flap at the front waistline leaving the back flap still attached to the back waistline. this will be the back suspender. Fold the two front strips down. Fold the back middle wide flap down. Use your thumb as a guide to cut notches all around the t-shirt. The notches cut in about 1/4″. When you open it up, it should be about 1/2″.

Diy t-shirt suspender skirt (no sew) part2

3. Braid the whole circumference of the t-shirt using the chart from daretodiy.com. Tie the last notch.

Diy t-shirt suspender skirt (no sew) part3

4. When you finish braiding all the way around the t shirt, the two (3 thin stips) and the back middle flap will be downwards under the braid. Pull the braids under and up towards the top. Fold the back middle flap up. Cut the middle back flap into 6 thin strips that’s still attached to the waist line. Pull the 6 thin strips under the waistline braids.

Diy t-shirt suspender skirt (no sew) part4

5. The two (3 thin strips) in the front have a sewing connection which was at the shoulder, you can secure it by sewing it with extra thread. If it it tight then there’s no need to do this step. Sometimes cutting the shirt will loosen the connection at the shoulder.

Diy t-shirt suspender skirt (no sew) part5

6. Braid the two (3 thi strips in the front). Weave the back flap that you’ve cut into 6 thin strips.

Diy t-shirt suspender skirt (no sew) part6

7. Connect the two front suspender braid to the back flap weave to create a flower. The connection looks like a “Y”. Cut off any odd pieces when you have secured the connection.

Diy t-shirt suspender skirt (no sew) part7

Cut t shirts are super fun experiments

Cut t shirt experiments are super fun especially if you have lot of old shirts lying around. Sometimes it takes some practice to get it right. Doing upcycle and repurpose projects not only saves your clothes from going to dumping grounds and polluting our planet but is a great way to express creativity. I’d be so happy to see what you made. Share what you made with your old t shirt.

Leave a Reply

  • Facebook

  • SUBSCRIBE TO MY

  • NOTE BOOKS

  • HISTORY

  • POPULAR NOTES